Clearway

Replacing Worn PVC Strips

PVC strips have become an indispensable solution in various industries, serving as effective barriers against temperature loss, dust, noise, and unwanted pests. Over time, however, these reliable PVC strips may wear down due to constant use, wear and tear, or severe environmental factors. To maintain the efficiency and comfort they provide, it's essential to know when and how to replace them. In this blog post, we'll delve into the importance of replacing worn PVC strips and explore three different methods to purchase and install replacement strips: PVC Bulk Rolls, PVC Replacement Strips, and QuickStrip Pre-Fabricated Rolls.

The Importance of Replacing Worn PVC Strips

PVC strips play a crucial role in preserving the ideal conditions within the workplace. Whether it’s a warehouse, manufacturing facility, cold storage unit, or commercial establishment, these strips contribute significantly to energy conservation and overall productivity. However, when they become worn, torn, or discolored, their efficacy diminishes, compromising the benefits they offer.

  • Energy Efficiency: Worn PVC strips lose their ability to provide an effective thermal barrier. This leads to temperature leakage, making climate control systems work harder to maintain desired temperatures, resulting in higher energy bills and reduced energy efficiency.
  • Contamination and Pest Invasion: Damaged strips allow dust, debris, and pests to enter the premises, leading to potential contamination of goods, health risks, and damage to sensitive equipment.
  • Safety Hazards: Heavily scratched strips that have lost their transparency, may pose safety hazards, causing accidents, especially in high-traffic areas with forklifts, carts, or machinery.
  • Aesthetic Appeal: The appearance of a well-maintained workspace leaves a positive impression on customers, visitors, and employees. Worn-out PVC strips can create a shabby appearance, affecting the overall image of the company using them.

Three Ways to Replace PVC Strips

PVC Bulk Rolls

PVC strips play a crucial role in preserving the ideal conditions within the workplace. Whether it’s a warehouse, manufacturing facility, cold storage unit, or commercial establishment, these strips contribute Rolls offer the lowest up-front cost (per foot) but it is important to recognize that none of the fabrication has been done to customize the PVC material for the specific door opening. The roll will need to unrolled, and each strip measured and cut to the proper length. Also depending on the type of mounting system being used in the strip door or curtain, each strip will need mounting holes punched or drilled into it to accommodate the mounting hardware. One potential downside of PVC Bulk Rolls is that they are available in specific lengths, which could be much longer than the amount of material needed for the specific application.

PVC Replacement Strips

For a highly customized, quick and straightforward solution, PVC Replacement Strips are a convenient option. They are available in any quantity and strip length, (example: 11 strips 77 inches long) and are already cut to the proper length and have the holes punched at the top of the strip. It’s possible to simply buy the exact number of PVC Replacement Strips needed for the application rather than a “full roll” of material, which could reduce the total cost of the project depending on the specs. One downside, due the high level of customization is the relatively higher cost “per linear foot” of this option.

QuickStrip Pre-Fabricated Rolls

For a highly customized, quick and straightforward solution, PVC Replacement Strips are a convenient option. They are available in any quantity and strip l similar to the “Bulk Rolls” in that they are rolls come in specific roll lengths, but similar to the “PVC Replacement Strips” in that they are pre-cut and pre-punched to the customer’s desired strip length inside the roll. With QuickStrip it is still necessary to purchase a “full roll” but when you order a QuickStrip roll you are able to designate the length of strips you need (“Pre-cut the strips at 120.5 inches”) on the Purchase Order and the roll arrives already fabricated (perforated) at that length and with the mounting holes (2 inches on center) at the top of each strip. It takes all of the fabrication work off your plate so you can unroll the strips and start installing them.

Conclusion

Replacing worn PVC strips is essential to maintain the efficiency, safety, and aesthetics of a workspace. By investing in PVC Bulk Rolls, PVC Replacement Strips, or QuickStrip Pre-Fabricated Rolls, you ensure that your facility remains protected from temperature fluctuations, contaminants, and unwanted pests. Remember, a small investment in replacing worn PVC strips can yield substantial returns in terms of energy savings, productivity, and employee comfort and safety.

Get in Touch

Our team is ready to help with answers to your technical questions, quote requests, or anything else you might need.

CLEARWAY WORLD HEADQUARTERS

169 Business Center Dr
Birmingham, AL 35244
E: info@clearwaydoor.com
P: 800.504.1716